12V 25A Battery Charger and Maintainer, does Lithium

Features

The 12V 25A Battery Charger and Maintainer (Trickle Charger) is designed to charge AGM, Calcium SMF, EFB, GEL, WET & Lithium (LiFePO4) batteries from 6Ah to 500Ah.
The charger can also be used to maintain batteries up to 750Ah. This battery charger and maintainer utilises state of the art patented 9 stage technology for charging various types of 12V batteries.
This Charger can also be used to maintain a wide range of batteries and features a patented repair and rejuvenation mode for lead-acid type batteries which breaks down heavily desulphated cells revitalising the battery increasing battery life and performance.

Power Supply Mode - In power supply mode the charger converts to constant current and constant voltage power supply allowing you to power 12V appliances, or retain memory when replacing a battery.
Temperature Compensation - This Charger will automatically adjust the charge voltage according to the ambient temperature for optimal charge efficiency to ensure maximum battery life.

2A Maintenance mode will charge smaller batteries between 6Ah and 40Ah and will maintain batteries up to 120Ah.
15A Silent charge mode will charge mid-sized batteries between 45Ah and 300Ah and will maintain batteries up to 450Ah.
25A Rapid charge mode will charge batteries between 75Ah and 500Ah and will maintain batteries up to 750Ah. This setting will give you the fastest charge possible.

Battery Charging vs. Battery Maintenance
What's the difference between the two and which battery charger suit your requirements best? Firstly you need to determine whether you need to recharge a flat battery entirely or just keep a battery at full charge.

Battery charging is when you are requiring to recharge a flat or dead battery to full.
Battery maintenance on the other hand is when you just want to keep a battery topped up. For instance, if you're storing a classic car that you only drive a few times a month but want to ensure it's ready to go on a sunny afternoon you would require battery maintenance as opposed to battery charging.
understanding each charger's limits is important.

Specifications

MANUAL in PDF [HERE]

Input: 240VAC 50Hz
Power Consumption (max): 3A (380W)
Output: 12V DC - 25A / 15A / 2A
Charge Voltage: 14.1 / 14.4V / 14.7V DC
Float Trickle Voltage: 13.6V DC (Lead-Acid battery Selection only)
Power Supply Mode: 13.8V DC / 25A Max.
Start Voltage: 2V DC
Suitable for: GEL, Calcium SMF, all Lead based batteries, AGM & WET (Inc EFB), Lithium (LifePO4)

Ideal for Charging:
6Ah - 500Ah (3600 CCA)
Ideal for Maintaining: 6Ah - 750Ah (5400 CCA)
Input Cord Length: 1.8m with 3 PIN AU AC Wall Plug
Output Cord Length: 25cm with Anderson 50A Connector
Charging Lead Length: 1.5m - Integrated Crocodile Clip / Ring Terminal / Temp. Sensor Harness
Dimensions: 279mm x 141mm x 67mm
Weight: 2kg
Operating Temperature: -15 to 50° C
Storage Temperature: -25 to 85° C

Contents

What's Included?
1 x 12v 25A multichemistry Charger
1 x Crocodile Clip w/integrated Ring Terminals Harness
1 x Owner's Manual

Product Enquiry

Contact Details

Request More Information

Details of the product above will be automatically included with your enquiry.

Associated Items