THE BATTERY CELL --- Phone 0800 030 999
9-Stage Battery Charging.
Boost battery performance and increase the life of your batteries.
Selectable Battery Types.
Selectable Charge Rate.
Charges 12V batteries from 3Ah-240Ah
Maintenance (trickle) charging up to 360Ah for longer life batteries
Patented desulphation and battery reconditioning and rejuvenation function
The 12V 12A Battery Charger and Maintainer (Trickle Charger) is designed to charge AGM, Calcium SMF, EFB, GEL, WET & Lithium (LiFePO4) batteries from 3Ah to 240Ah.
The charger can also be used to maintain batteries up to 360Ah. The 12V 12A battery charger and maintainer utilises state of the art patented 9 stage technology for charging various types of 12V batteries.
It can also be used to maintain a wide range of batteries and features a patented repair and rejuvenation mode for lead-acid type batteries which breaks down heavily desulphated cells revitalising the battery increasing battery life and performance.
1A Maintenance mode will charge smaller batteries between 3Ah and 20Ah and will maintain batteries up to 100Ah.
8A Silent charge mode will charge mid-sized batteries between 24Ah and 160Ah and will maintain batteries up to 240Ah.
12A Rapid charge mode will charge batteries between 36Ah and 240Ah and will maintain batteries up to 360Ah. This setting will give you the fastest charge possible.
Battery Charging vs. Battery Maintenance
What's the difference between the two and which battery charger suit your requirements best? Firstly you need to determine whether you need to recharge a flat battery entirely or just keep a battery at full charge.
Battery charging is when you are requiring to recharge a flat or dead battery to full.
Battery maintenance on the other hand is when you just want to keep a battery topped up. For instance, if you're storing a classic car that you only drive a few times a month but want to ensure it's ready to go on a sunny afternoon you would require battery maintenance as opposed to battery charging.
understanding each charger's limits is important.
MANUAL in PDF [HERE]
Input: 240VAC 50Hz
Power Consumption (max): 1.8A (175W)
Output: 12V DC - 12A / 8A / 1A
Charge Voltage: 14.1 / 14.4V / 14.7V DC
Float Trickle Voltage: 13.6V DC (Lead-Acid battery Selection only)
Start Voltage: 2V DC
Suitable for: GEL, Calcium SMF, AGM & WET (Inc EFB), Lithium (LifePO4)
Ideal for Charging:
3Ah - 240Ah (1700 CCA)
Ideal for Maintaining: 3Ah - 360Ah (2600 CCA)
Input Cord Length: 1.8m with 2 PIN AU AC Wall Plug
Output Cord Length: 1.2m with PP30 2 Pin Connector
Charging Lead Length: 60cm - Integrated Crocodile Clip / Ring Terminal Harness
Dimensions: 214mm x 103mm x 55mm
Operating Temperature: -15 to 50° C
Storage Temperature: -25 to 85° C
1 x 12V 12A multichemistry Charger
1 x Crocodile Clip w/integrated Ring Terminals Harness
1 x Owner's Manual
Details of the product above will be automatically included with your enquiry.