Inverter Charger 48v 5000w with 70amp Charger

Inverter Charger 48v 5000w with 70amp Charger
48v volt 5000 watt inverter-charger (120amp charger)
European Design Victron
48Volt VDC Input/Output
Output power (continous) 5000W
Output power (surge) 9000W
Click image for more options.
48/5000/70-100 (IPOWER)

The Victron Inverter is a powerful pure sine wave inverter, a sophisticated multistage battery charger and a high-speed AC transfer switch in a single compact enclosure. Victron Inverter is renowned for unbeatable quality and market-leading features. Designed for marine, motorhome & off grid use.
Two AC Outputs
The high speed AC transfer switch ensures continuous AC output with no interruptions. If shore/generator power is disconnected (in the event of a grid failure), the Inverter takes over the power supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.
Virtually unlimited power thanks to parallel operation
Up to 6 Multiplus inverter/chargers can operate in parallel to achieve higher power output. For example, six 24v 5000w 120a units will provide 30 kVA output power with 720 Amps charging capacity.
Three phase capability
In addition to parallel connection, three units of the same model can be configured for three-phase output.
PowerControl - Dealing with limited generator, shore side or grid power
The Inverter has a very powerful battery charger. It can draw a lot of current from the generator or shore supply. With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take over supply of other AC loads thus preventing the generator or shore supply from being overloaded.
The powerful battey charger uses advanced ‘adaptive charge’ software. The software fine-tunes the three stage automatic process to suit the condition of the battery, and adds a forth stage for long periods of float charging. An example of the advanced charging software is the 'variable absorption charging time'. Classic 3-step chargers have a fixed absorption time which can easily overcharge the battery if it is activated often through-out the day. The Inverter charger will adjust the absorption charging time depending on the recent discharge history. This ensures the battery is not overcharged and increases it's longevity.
The Inverter will charge a second battery bank using an independent trickle charge output intended for a main engine or generator starter battery.

Voltage options: DC 48V
Input voltage range: DC 38-66V
Input Power (no load): 18W
Input Power (search mode): 12W
Output voltage (AC): 230V ± 2%
Output frequency: 50HZ
Optimum inverter efficiency: 93% - 95%
Voltage input: AC 187-265V
Charge current house battery: 70A
Charge current starter battery: 4A
Charge voltage 'absorption': 57.6V
Charge voltage 'float': 55.2V
Storage mode: 52.8V
Transfer switch: 32A
Weight 29kg
Dimensions (mm) 506L x 275W x 147D
Warranty 2 years
Input voltage options 48V
Output power (continous) 5000W
Output power (surge) 9000W
Output waveform Pure sine wave

Inverter range in PDF for download HERE

48/5000/70-100 (IPOWER)