FULL MANUAL IN PDF HERE
Workshop Battery Manager
Projecta presents an evolution in vehicle battery maintenance. The HDBM4000 is your complete workshop battery manager: an all-in-one solution for testing, charging and maintaining batteries of multiple chemistries and voltages, including stop/start batteries found in modern vehicles. Unlike conventional 40A workshop chargers, the unit is very light and compact with a tough housing and 3 metre long leads.
All-in one solution for battery testing, charging and maintenance
8 stage automatic and manual 3–40A charging
Multi-chemistry, multi-voltage 6–24V operation
FEATURES
Multi-Voltage Operation
Adjustable to suit 6, 12 or 24 Volt operation
Customise Charge Profile
Adjustable output for different battery sizes and chemistry type selection to suit Wet, Calcium, AGM and Gel
Testing & Diagnostics
Sophisticated functions to accurately test a vehicles alternator for faults, starting capacity as well as measure voltage levels
Engine Start
Delivers a fast charge of 70A for 3 seconds (30 sec cycles) to start vehicles with a flat battery (subject to battery condition)
Power Supply Mode
Maintains constant voltage allowing vehicle diagnostics or to retain settings during battery replacement
SPECIFICATIONS
PART NO |
HDBM4000 |
||||||
TYPE |
8 Stage Automatic |
||||||
INPUT |
240V, 50Hz, 600W |
||||||
OUTPUT |
3–40A at 6V |
||||||
ENGINE START |
12V only 70A for 3 secs |
||||||
CHARGE CONTROL |
|
||||||
FLOAT VOLTAGE |
|
||||||
FLOAT VOLTAGE |
|
||||||
BACK DRAIN |
|
||||||
APPROVALS |
Electrical Safety, EMC |
||||||
BATTERY CHARGE TIMES | |||||||
HDBM4000 |
6 & 12V |
24V |
CHARGE |
||||
AUTOMOTIVE (CCA) |
100–3700 |
100–2000 |
6–15 hrs |
||||
MARINE (MCA) |
120–4600 |
120–2300 |
8–18 hrs |
||||
DEEP CYCLE (AH) |
14–600 |
14–300 |
7–17 hrs |
Details of the product above will be automatically included with your enquiry.
Top |