Projecta 2000 Watt Pure Sine Wave Inverters include a built in automatic AC Transfer Switch. The switch allows an appliance to be powered from either mains power or the inverter (battery power). The inclusion of the AC transfer switch makes it ideal for permanent installation in caravans, motor homes, work vehicles etc ensuring continuous and uninterrupted AC power when switching from battery power to mains power and vice versa. The automatic change-over function means there is no need to manually swap over AC plugs or switch dials between the two power sources. To ensure a continuous flow of power to the appliance when switching to mains power supply, the IP2000 range has been engineered to wait 3 seconds for the power to be steady before switching in a super fast 20 millisecond (0.02 seconds) change-over. This guarantees smooth change over and means no interruption when running appliances, e.g. computers won’t reboot, TVs won’t switch off etc. The IP2000 inverter offers a number of advantages over a typical inverter/charger combination. Keeping the two units independent of one another allows you to combine the IP2000 with any size battery charger for the ultimate tailor made set-up, and because they are two separate units, either can operate without the other in the event that one fails. When mains power is available, the battery charger charges the battery and the mains power passes through the inverter and powers the accessories directly. When the mains is disconnected the battery charger stops working and the appliance automatically switches across to inverter power.
FEATURES AC transfer switch Ensures seamless flow of power when switching between mains and battery power Remote control LCD display and remote control unit provide information on battery voltage, power usage and load capacity ECO mode Reduces power consumption extending battery run time Safety 'cut out' switch RCD provides absolute protection for the user and devices being powered Approved output sockets AS/NZS approved 240V sockets. Inverter complies to Australian standard AS4763 (AS3001 ready)
INPUT; 24V DC, 100A Max NO LOAD CURRENT DRAW; 10mA Eco OUTPUT; 240VAC, 50Hz (Pure Sine Wave) OUTPUT POWER; 2000W Continuous (4000W Peak) INVERTER CLASSIFICATION; RCD Protected Inverter
INPUT; 24V DC, 100A Max NO LOAD CURRENT DRAW; 10mA Eco OUTPUT; 240VAC, 50Hz (Pure Sine Wave) OUTPUT POWER; 2000W Continuous (4000W Peak) INVERTER CLASSIFICATION; RCD Protected Inverter EFFICIENCY; 85–90% LOW BATTERY ALARM; 21.0 Volt SHUTDOWN; 19.5V (±0.2V) COOLING FAN; Automatic temperature controlled THERMAL SHUTDOWN; 65°C (±5°C) FUSE; 350A Megafuse IDEAL BATTERY SIZE; 50–200Ah MINIMUM BATTERY SIZE; 50Ah, 400CCA RUN TIME WITH 2000W ON 50Ah BATTERY; 5 minutes RUN TIME WITH 100W GLOBE ON 50Ah BATTERY; 7 hours APPROVALS; Electrical Safety, EMC, AS4763