charger extras

For ePOWER 'AC' chargers only. This remote control and display is good for a secondary location to view what is happening with your ePOWER unit. In most cases this is useful if the Charging unit is not so readily accessable, or a preferance for it to be hidden away exists. This unit provides the same displays and controls as the display on the front of the ePOWER charger.
Click on image for more options.

Have you Bought or are you Buying an ePOWER charger? You may want to have a few spares of these. Should your existing temperature Sensor (that comes with each ePOWER charger) fail, you will need a replacement or some of the additional features available will not function without it.

For TBC Omnicharge 'AC' chargers only. This remote control and display is goo for a secondary location to view what is happening with your Omnicharge unit. In most cases this is useful if the Charging unit is not so readily accessable, or a preferance for it to be hidden away exists. This unit provides the same displays and controls as the display on the front of the Omnicharger charger.

This remote panel (part# 808-8040-01) is compatible with the following part numbers:
804-1220-02, 804-1240-02, 804-1260-02, 804-2410, 804-2420 and 804-2430.
Please use remote panel (part# 808-8040-00) for 804-1220, 804-1240 and 804-1260.
Used for parallel Truecharge2 chargers -please read info.

Advanced Remote for Monitoring and Full Control of Battery Charger Performance.
Click image for more options.

Xantrex Truecharge2 60 Amp Remote Panel Advanced Remote for Monitoring and Full Control of Battery Charger Performance. The TRUECHARGE2 Remote Panel is designed for use with TRUECHARGE2 Battery Chargers.

It's here!! Battery Monitoring Via your Bluetooth and Smart phone technology. Get alerts sent to your phone from your battery!
Not sure when you need to charge your battery? Is their a fault? Find out BEFORE you need the vehicle (Boat, RV etc).
Click on the Image for the full details

Comfort Connect – Cig Plug is an easy to fit adapter that allows charging from a CTEK compatible charger through the 12 V cigarette lighter or accessory socket. 400 mm cable length. Compatible with all CTEK chargers up to 10 A.

NOTE: Socket must be powered even when ignition is in ”off” position.

Click on image for more options.

Comfort Connect – Cig Socket is a useful accessory that increases the usage of the CTEK Comfort Connect battery connector. When the Comfort Connect - Cig Socket has been connected, it allows you to use GPS, mobile phones, handlebar heaters and heated clothing etc.

1 m cable length.

Comfort Indicator – Cig Plug is a combined quick connector and indicator for easy charging. Perfect for checking status and charging the battery through the vehicle 12 V socket. Suitable for all 12 V CTEK chargers up to 7 A. Comfort Indicator – Cig Plug is a universal model that fits both 12 mm and 21 mm sockets.

NOTE: Socket must be powered even when ignition is in ”off” position.
Click on image for more options.

Comfort Indicator – Clamp uses a simple ‘traffic light’ system to show the state of charge of your battery. Easy to move between vehicles, – ideal for workshops and showrooms. Should charging be required the cap can be removed from the unit and a compatible CTEK charger plugged in to restore the battery to fully charged status.

Cable length 1.5 m.
Click on image for more options.

Comfort Indicator – Panel uses a simple ‘traffic light’ system to show the state of charge of your battery. Available in two cable lengths, 1.5 m and 3.3 m. No cables are included in the Comfort Indicator – Panel with flat pin connection.
This connection has an indicator "PANEL" allowing you to tidily flush mount this accessory to any display panel.
Click on image for more options.

CTEK Comfort Indicator – Pigtail converts an existing SAE quick connector into a sealed indicator of the status of your battery. It also opens up for charging with a CTEK 12 Volt charger CTEK Comfort Indicator can prolong the life expectancy of the battery as it makes sure it can always be fully charged and it indicates when the harmful sulfation process begins.
Click on image for more options.

CTEK BUMPER helps protect your CTEK charger from bumps and scratches. Adds extra grip on slippery surfaces. Made of durable silicon rubber material. The CTEK BUMPER fits snugly around the body of your CTEK charger.

CTEK BUMPER is suitable for all CTEK chargers 3.8–5.0 A.

Comfort Indicator – Eyelet M6 (M8 size sold separately) use a simple ‘traffic light’ system to show the state of charge of your battery. With Comfort Indicator – Eyelet you have a permanent installation. Should charging be required plug in the CTEK charger and charge the battery. Cable length 500 mm.
Click on image for more options.

Robust and versatile mounting bracket for practical charger and cable storage. Open frame design allows easy access to charger functions.

Practical storage of charger and cables. Open frame design allows easy access to charger functions. Suitable for all CTEK chargers 3.8–5.0 A.

Click on image for more options.

Extension cable allows the CTEK charger to be used further away from the vehicle or battery. To use, simply connect the Comfort Connect Extension cable into your CTEK charger accessory plug and place the other end into the socket of the clamp or eyelet accessories that came supplied with your CTEK charger. The unique CTEK Comfort Connect system ensures a secure connection.

Suitable for use with all CTEK chargers up to 10A using the Comfort Connect system.

A practical quick connector for those with batteries that are difficult to access or are hidden. The eyelet terminals are fitted to the battery, giving effortless connection without the need of actually reaching the battery.

Comfort Connect – Eyelet is available in three different sizes for different battery terminal sizes.

Eyelet: M10 (10,4 mm)
Cable length on all: 40 cm
Click on image for more options.

A practical quick connector for those with batteries that are difficult to access or are hidden. The eyelet terminals are fitted to the battery, giving effortless connection without the need of actually reaching the battery.

Comfort Connect – Eyelet is available in three different sizes for different battery terminal sizes.

Eyelet: M6 (6,4 mm)
Cable length on all: 40 cm

A practical quick connector for those with batteries that are difficult to access or are hidden. The eyelet terminals are fitted to the battery, giving effortless connection without the need of actually reaching the battery.

Comfort Connect – Eyelet is available in three different sizes for different battery terminal sizes.

Eyelet: M8 (8,4 mm)
Cable length on all: 40 cm

A practical combination of quick connector and indicator for those with batteries that are difficult to access.

The indicator shows the battery’s charge level simply and clearly.

The eyelet terminals are fitted to the battery, giving effortless connection without the need of actually reaching the battery.
Click image for more options.